NSN 5305-00-579-5988
High Torque Screw
Between 0.892 inches and 0.922 inches fastener length, flat countersunk head style, between 0.497 inches and 0.507 inches head diameter, grip diameter: between 0.2490 inches and 0.2495 inches .
Manufacturer part number HT4025L4-7 for national stock number 5305005795988.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-579-5988.
-
MPN or Model
HT4025L4-7
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.388 inches and 0.408 inches -
Fastener Length
Between 0.892 inches and 0.922 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.497 inches and 0.507 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
Between 0.428 inches and 0.448 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Stainless steel -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-935-7580 MPN H804-632-16Machine Screw
- 5305-01-141-7899 MPN HT4020-6-16AYShoulder Screw
- 5305-01-193-6851 MPN HT8137-5-3ASClose Tolerance Screw
- 5305-01-195-0286 MPN BACB30LU3D8Close Tolerance Screw
- 5305-01-195-1576 MPN SC217V08-4Machine Screw
- 5305-01-240-1794 MPN SC2804-141Socket Head Cap Screw
- 5305-01-381-5721 MPN SC102-4-33Close Tolerance Screw
- 5305-01-417-2490 MPN 3M1169V-3-14AClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-579-5988 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4025L4-7 | Huck International, Inc. |
HT4025L4-7 | Arconic Global Fasteners & Rings, |
ST3M454-4L-7 | Fastener Innovation Technology, Inc. |
WV4025L-4-7 | West Coast Aerospace Inc |
HT4025L4-7 | Sps Technologies, Llc |
HT4025L4-7 | Lisi Aerospace Canada Corp |
WC4025L-4-7 | West Coast Aerospace Inc |
HT4025L4-7 | Hi-shear Corporation |
HT4025L4-7 | Alcoa Fastening Systems |
11905-4L7 | Reid Products Inc. |
HT4025L4-7 | Sps Technologies Ltd Tj Brooks |
HT4025L4-7 | Satair A/s |
ST3M454-4L7 | Boeing Company, The |
HT4025L4-7 | Sps Technologies Inc |
HT4025L4-7 | Huck Intl Inc |
10125396 | Nimikkeistokeskus Ncb Finland |
HT4025L4-7 | Sps Technologies, Llc |
HT4025L4-7 | Alcoa Global Fasteners, Inc. |
ST3M454-4L7 | Twist Tite Mfg, Inc |