NSN 5305-00-795-1926
Adjusting Screw
About this product
Drilled and tapped hole no. 6-32 thru head and shoulder.
Manufacturer part number 46177-3 for national stock number 5305007951926.
Datasheet
-
Product description
Thumbscrew NSN 5305-00-795-1926.
-
MPN or Model
46177-3
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
0.625 inches -
Fastener Length
2.063 inches -
Head Style
Knurled no. 1 -
Head Diameter
1.500 inches -
Head Height
0.437 inches -
Point Length
0.125 inches -
First Diameter From Head
1.000 inches -
Second Diameter From Head
Between 0.151 inches and 0.161 inches -
Distance From Largest Bearing Surface Of Head To End Of First Diameter
0.188 inches -
Distance From Largest Bearing Surface Of Head To End Of Second Diameter
1.125 inches -
Point Style
Cone -
Thread Diameter
0.250 inches -
Thready Qty Per Inch (tpi)
20 -
Point Chamfer Angle
60.0 degrees -
Material
Steel comp 303 -
Material Specification
Qq-s-764 federal specification single material response -
Surface Treatment
Oxide -
Surface Treatment Specification
44286, fscm 24930 mfr ref single treatment response -
Thread Series Designator
Unc
More from these suppliers
- 5950-00-009-0125 MPN PL599568Radio Frequency Transformer
- 5905-00-057-0532 MPN G310123S3Film Fixed Resistor
- 5905-00-412-4052 MPN G310125-3Nonprecision Wire Wound Variable Resistor
- 5905-00-426-8899 MPN SEL5560445-15Film Fixed Resistor
- 5950-00-444-3944 MPN 160018-1Power Transformer
- 5935-00-828-8041 MPN G350006-15Electrical Receptacle Connector
- 5930-00-966-2750 MPN 106014Rotary Switch
- 5940-01-332-5229 MPN 148780-1Terminal Board
Thumbscrew
An externally threaded fastener whose threaded portion is of one nominal diameter. It may have an unthreaded portion with a diameter less than, equal to, or greater than the diameter of the threaded portion. It has either a vertically flattened, circular knurled, or wing type head, all of which are designed for rotation by the thumb and fingers. For items having wrenching facilities such as socket recess, multiple spline or slot heads, use screw (as modified) or bolt (as modified).
![Mechanic Bill explains Adjusting Screw](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5305-00-795-1926 thumbscrewManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
46177-3 | Harris Corporation |
Stock Check
![](/public/images/partscage_shelf3.png)
Availability of this NSN has not been updated recently. Submit
the pricing and availbility form above to receive an up to date quote.