NSN 5305-00-805-4253
High Torque Screw
Between 2.260 inches and 2.277 inches fastener length, button head style, 0.391 inches head diameter, head height: 0.109 inches .
Manufacturer part number 51B221-32H for national stock number 5305008054253.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-805-4253.
-
MPN or Model
51B221-32H
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.261 inches and 0.308 inches -
Fastener Length
Between 2.260 inches and 2.277 inches -
Head Style
Button -
Head Diameter
0.391 inches -
Head Height
0.109 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Shank Unthreaded Hole Diameter
0.070 inches first hole -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 1.969 inches and 1.999 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.117 inches first hole -
Surface Finish
32.0 microinches grip -
Material
Steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 6150 or steel comp 8735 -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type 1 federal specification single treatment response or qq-p-416, type 2 federal specification single treatment response -
Thread Series Designator
Unc
More from these suppliers
- 5305-00-316-8110 MPN AIC818-06-4CSocket Head Cap Screw
- 5305-01-016-1549 MPN 811C00-7Machine Screw
- 5305-01-130-3259 MPN AIC944-3-14Machine Screw
- 5305-01-254-2565 MPN 3M963-4L8Close Tolerance Screw
- 5305-01-303-6353 MPN AIC939-3-8Close Tolerance Screw
- 5305-01-351-6320 MPN AIC1700-3-7Close Tolerance Screw
- 5305-01-386-2933 MPN AIC1700-5-9Close Tolerance Screw
- 5305-01-435-3159 MPN BACB30LU6-25Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-805-4253 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
51B221-32H | Northrop Grumman Technical Services, |
51B221-32H | Northrop Grumman Systems Corporation |
51B221-32H | Sps Technologies, Llc |
51B221-32H | Sps Technologies, Llc |
51B221-32H | Hi-shear Corporation |
51B221-32H | Sps Technologies, Llc |
51B221-32H | Alcoa Global Fasteners, Inc. |
51B221-32H | Lisi Aerospace Canada Corp |