NSN 5305-00-808-3978
High Torque Screw
Between 2.140 inches and 2.187 inches fastener length, flat countersunk head style, between 0.881 inches and 0.888 inches head diameter, grip diameter: between 0.4360 inches and 0.4370 inches .
Manufacturer part number HT7M24 for national stock number 5305008083978.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-808-3978.
-
MPN or Model
HT7M24
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.656 inches -
Fastener Length
Between 2.140 inches and 2.187 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.881 inches and 0.888 inches -
Grip Diameter
Between 0.4360 inches and 0.4370 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.437 inches -
Grip Length
1.500 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp 4140 or steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-s-5000 military specification 2nd material response or mil-s-8503 military specification 3rd material response or mil-s-6098 military specification 4th material response or mil-s-6049 military specification 5th material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 3 federal specification single treatment response -
Thread Series Designator
Unf -
Specification Data
80205-nas587 professional/industrial association standard
More from these suppliers
- 5935-01-562-8027 MPN HLS47-437DPlug-in Electronic Components Socket
- 5305-00-185-0239 MPN NAS1101-3-41Machine Screw
- 5305-00-618-1170 MPN NAS11122E13Close Tolerance Screw
- 5305-00-680-6376 MPN HT4M-19Close Tolerance Screw
- 5305-01-020-6889 MPN NAS1221-06-2Machine Screw
- 5305-01-050-1497 MPN NAS1189 06P6NHSocket Head Cap Screw
- 5305-01-059-2647 MPN NAS1101-06-18Machine Screw
- 5305-01-107-3523 MPN NAS1101-06-59Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-808-3978 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT7M24 | Lisi Aerospace Canada Corp |
HT7M24 | Hi-shear Corporation |
NAS587-24 | National Aerospace Standards |