NSN 5305-00-957-5713
Bolt Stove
Between 1.391 inches and 1.438 inches fastener length, flat countersunk undercut head style, between 0.628 inches and 0.633 inches head diameter, head height: between 0.087 inches and 0.089 inches .
Manufacturer part number HT5U14 for national stock number 5305009575713.
Datasheet
-
Product description
Machine Screw NSN 5305-00-957-5713.
-
MPN or Model
HT5U14
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.531 inches -
Fastener Length
Between 1.391 inches and 1.438 inches -
Head Style
Flat countersunk undercut -
Head Diameter
Between 0.628 inches and 0.633 inches -
Head Height
Between 0.087 inches and 0.089 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.312 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
100.0 degrees -
Screw Material
Steel comp 4140 or steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740 or steel comp 4130 or steel comp 4037 -
Screw Surface Treatment
Cadmium -
Screw Surface Treatment Specification
Qq-p-416, type 1, cl 3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5305-00-354-4919 MPN HT4024L4-11Close Tolerance Screw
- 5305-01-045-4302 MPN HT4016-4-10YShoulder Screw
- 5305-01-146-6142 MPN HT4041-4-11-6Close Tolerance Screw
- 5305-01-158-6248 MPN ST3M455-9DL45Close Tolerance Screw
- 5305-01-160-7561 MPN ST3M455-5L18-1Close Tolerance Screw
- 5305-01-417-2494 MPN TX1026V3-15AClose Tolerance Screw
- 5305-01-500-6403 MPN TX1026V3-21AClose Tolerance Screw
- 5305-01-512-8299 MPN TX1027C6-18AClose Tolerance Screw
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-00-957-5713 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT5U14 | Hi-shear Corporation |
3M49-5-14 | Alcoa Global Fasteners, Inc. |
3M49-5-14 | Boeing Company, The |
3M49-5-14 | Sps Technologies Inc |