NSN 5305-01-014-1198
High Torque Screw
Between 0.988 inches and 1.035 inches fastener length, flat countersunk head style, between 0.389 inches and 0.394 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number HT239-4-11D for national stock number 5305010141198.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-014-1198.
-
MPN or Model
HT239-4-11D
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.290 inches and 0.357 inches -
Fastener Length
Between 0.988 inches and 1.035 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.389 inches and 0.394 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.081 inches first hole -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
Between 0.678 inches and 0.698 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
100.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.878 inches first hole and 0.898 inches first hole -
Surface Finish
63.0 microinches threads -
Material
Steel comp 4140 or steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740 or steel comp 4130 -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type 1, cl 3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5305-00-057-2671 MPN NAS1101-3-7Machine Screw
- 5305-00-151-6962 MPN HT239PB3-11Close Tolerance Screw
- 5305-00-680-6375 MPN HT4M-18Close Tolerance Screw
- 5305-01-025-1345 MPN NAS1101E06-8Machine Screw
- 5305-01-044-3006 MPN NAS1191E4T7NSocket Head Cap Screw
- 5305-01-073-0954 MPN HT4008-4-8Shoulder Screw
- 5305-01-080-6608 MPN NAS1012-21Hexagon Head Cap Screw
- 5305-01-092-0202 MPN NAS1101-3-68Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-014-1198 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT239-4-11D | Hi-shear Corporation |
HT239-4-11D | Lisi Aerospace Canada Corp |
HT239-4-11D | Hi-shear Corporation |
HT239-4-11D | Lisi Aerospace Canada Corp |