NSN 5305-01-043-0556
High Torque Screw
Retaining element in shank.
Manufacturer part number MS3369B432 for national stock number 5305010430556.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-043-0556.
-
MPN or Model
MS3369B432
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.277 inches and 0.328 inches -
Fastener Length
Between 2.418 inches and 2.438 inches -
Head Style
Crowned hexagon -
Head Height
Between 0.126 inches and 0.141 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Grip Diameter
Between 0.2487 inches and 0.2492 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Internal Drive Style
Slot -
Thread Diameter
0.250 inches -
Grip Length
Between 2.000 inches and 2.016 inches -
Thready Qty Per Inch (tpi)
28 -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.323 inches first hole and 2.343 inches first hole -
Surface Finish
32.0 microinches grip -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-100-6838 MPN CA1114-3-7PScrew Assembly
- 5305-01-171-6509 MPN CA28080-08-9HSPanel Screw Assembly
- 5305-01-190-0250 MPN CA2194-3-05Close Tolerance Screw
- 5305-01-197-4011 MPN CA2653-4-21Close Tolerance Screw
- 5305-01-471-9537 MPN CA22001C10-7-10Machine Screw
- 5305-01-518-9959 MPN CA2292-10-17-17Panel Screw Assembly
- 5305-00-060-9478 MPN AS-110-4-13Close Tolerance Screw
- 5305-01-530-5972 MPN AVL321-7Externally Relieved Body Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-043-0556 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS3369B432 | Military Standards |
AS169-4-32 | Avibank Mfg., Inc. |
CA2658-4-32 | Arconic Global Fasteners & Rings, |