NSN 5305-01-043-5750
High Torque Screw
Between 1.250 inches and 1.297 inches fastener length, flat countersunk head style, between 0.555 inches and 0.560 inches head diameter, grip diameter: between 0.3735 inches and 0.3745 inches .
Manufacturer part number HT239PB-6-14 for national stock number 5305010435750.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-043-5750.
-
MPN or Model
HT239PB-6-14
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.365 inches and 0.432 inches -
Fastener Length
Between 1.250 inches and 1.297 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.555 inches and 0.560 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.375 inches -
Grip Length
Between 0.865 inches and 0.885 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
100.0 degrees -
Surface Finish
63.0 microinches threads -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp 4140 or steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740 or steel comp 4130 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
26512-gb510l professional/industrial association standard
More from these suppliers
- 5305-00-082-1897 MPN 3MA509-10R9Machine Screw
- 5305-00-234-9647 MPN HT1030-3-18Shoulder Screw
- 5305-00-805-3839 MPN 51B221-9HMachine Screw
- 5305-01-010-9942 MPN HT8137-3-7Close Tolerance Screw
- 5305-01-045-3023 MPN ST3M506-3-7-1Socket Head Cap Screw
- 5305-01-054-6232 MPN VT1696-6-11Close Tolerance Screw
- 5305-01-100-8792 MPN BACB30LU3-12Close Tolerance Screw
- 5305-01-103-1766 MPN HT4072-4-6-7Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-043-5750 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT239PB-6-14 | Hi-shear Corporation |
106750-6-14 | Sps Technologies, Llc |
HT8043-6-14 | Arconic Global Fasteners & Rings, |
A147-6-14 | Huck International, Inc. |
BM19025-6-14 | Huck International, Inc. |
HT239PB-6-14 | Lisi Aerospace Canada Corp |
GB510L6-14 | Northrop Grumman Systems Corporation |
A147-6-14 | Huck Intl Inc |
BM19025-6-14 | Huck Intl Inc |
HT8043-6-14 | Alcoa Global Fasteners, Inc. |
HT239PB-6-14 | Hi-shear Corporation |
106750-6-14 | Sps Technologies, Llc |
GB510L6-14 | Northrop Grumman Systems Corporation |
HT8043-6-14 | Alcoa Global Fasteners, Inc. |
A147-6-14 | Huck Intl Inc |
BM19025-6-14 | Huck Intl Inc |