NSN 5305-01-048-6597
High Torque Screw
Between 0.985 inches and 1.015 inches fastener length, flat countersunk head style, between 0.429 inches and 0.477 inches head diameter, grip diameter: between 0.3110 inches and 0.3120 inches .
Manufacturer part number ASE50286-22 for national stock number 5305010486597.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-048-6597.
-
MPN or Model
ASE50286-22
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.375 inches -
Fastener Length
Between 0.985 inches and 1.015 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.429 inches and 0.477 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.312 inches -
Grip Length
Between 0.615 inches and 0.635 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
100.0 degrees -
Material
Steel comp e4340 or steel comp 8740 -
Material Specification
Mil-s-5000 military specification 1st material response or mil-s-6049 military specification 2nd material response or ams 5322 assn standard 2nd material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 ty2 cl2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-058-2898 MPN NAS1142E2Close Tolerance Screw
- 5305-00-079-1728 MPN 3MFR1505-8Machine Screw
- 5305-00-144-8446 MPN NAS1146-6Close Tolerance Screw
- 5305-00-274-7245 MPN 16990N8F12DSocket Head Cap Screw
- 5305-00-541-9036 MPN LS15237C3-1Close Tolerance Screw
- 5305-00-551-4844 MPN NAS1221-3E4Machine Screw
- 5305-00-680-5412 MPN NAS1204-48Close Tolerance Screw
- 5305-00-842-4603 MPN NAS1102-06-4Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-048-6597 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
ASE50286-22 | United Technologies Corporation |
LS15237-5-10 | Lockheed Martin Corporation |
LS15237-5-10 | Sps Technologies, Llc |
LS15237-5-10 | Hi-shear Corporation |
LS15237-5-10 | Alcoa Global Fasteners, Inc. |
LS15237-5-10 | Lisi Aerospace Canada Corp |