NSN 5305-01-054-6241
High Torque Screw
Conical bearing surface of head 99.0 degree to 101.0 degree included angle 0.065 in. Long.
Manufacturer part number C9535-6-28 for national stock number 5305010546241.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-054-6241.
-
MPN or Model
C9535-6-28
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.555 inches and 0.585 inches -
Fastener Length
2.320 inches -
Head Style
Flat chamfer -
Head Diameter
Between 0.515 inches and 0.535 inches -
Head Height
Between 0.096 inches and 0.106 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Internal Drive Style
Offset cruciform (torque set) -
End Application
Aircraft, f-16 -
Thread Diameter
0.375 inches -
Grip Length
Between 1.740 inches and 1.760 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-001-8181 MPN 3MA334CFA15Close Tolerance Screw
- 5305-00-510-5300 MPN LS15263V4-18Machine Screw
- 5305-00-941-0212 MPN 502089Machine Screw
- 5305-00-969-4749 MPN AIC1351-006Socket Head Cap Screw
- 5305-01-004-9497 MPN AIC813-06R16Machine Screw
- 5305-01-027-2005 MPN HT4020-3-7AClose Tolerance Screw
- 5305-01-303-5636 MPN AIC939-3-14Close Tolerance Screw
- 5305-01-380-0796 MPN AIC1184E303Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-054-6241 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
C9535-6-28 | Lockheed Martin Corporation |
121754-6-28 | Sps Technologies, Llc |
09535-5-28 | Arconic Global Fasteners & Rings, |
AIC9535-6-28 | Sps Technologies, Llc |
VT1696-6-28 | Alcoa Global Fasteners, Inc. |