NSN 5305-01-056-9412
Panel Screw
0.468 inches fastener length, flat chamfer head style, 0.281 inches head diameter, head height: 0.125 inches .
Manufacturer part number 33-055287-01 for national stock number 5305010569412.
Datasheet
-
Product description
Externally Relieved Body Screw NSN 5305-01-056-9412.
-
MPN or Model
33-055287-01
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
0.312 inches -
Fastener Length
0.468 inches -
Head Style
Flat chamfer -
Head Diameter
0.281 inches -
Head Height
0.125 inches -
First Diameter From Head
Between 0.093 inches and 0.099 inches -
Distance From Largest Bearing Surface Of Head To End Of First Diameter
0.156 inches -
Internal Drive Style
Slot -
Thread Diameter
0.138 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Material
Steel -
Material Specification
Ams 5734 assn standard single material response -
Thread Series Designator
Unc
More from these suppliers
- 5935-00-152-9571 MPN 303198-2Plug-in Electronic Components Socket
- 5935-00-190-4811 MPN 2122-0004-02Electrical Plug Connector
- 5930-00-235-9731 MPN 2006-2BRotary Switch
- 5935-00-501-5708 MPN B3500-9Plug-in Electronic Components Socket
- 5935-01-050-0282 MPN 46-031097-11Electrical Receptacle Connector
- 5950-01-067-0999 MPN 40-052794-01Power Transformer
- 5935-01-072-8689 MPN 46-054287-01Electrical Receptacle Connector
- 5985-01-104-9604 MPN 888-2935Antenna Cover
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is no. 0 (0.060 in.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below no. 10 (0.190 in.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also bolt, externally relieved body and bolt, internal wrenching.
Pricing and Availability
Get a quote for 5305-01-056-9412 externally relieved body screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
33-055287-01 | Northrop Grumman Systems Corporation |