NSN 5305-01-083-6363
High Torque Screw
1.320 inches fastener length, flat countersunk head style, between 0.515 inches and 0.770 inches head diameter, grip diameter: between 0.3735 inches and 0.3745 inches .
Manufacturer part number VT1696-6-12 for national stock number 5305010836363.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-083-6363.
-
MPN or Model
VT1696-6-12
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.570 inches -
Fastener Length
1.320 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.515 inches and 0.770 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.375 inches -
Grip Length
Between 0.740 inches and 0.760 inches -
Thready Qty Per Inch (tpi)
24 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-162-4064 MPN SC1777V08-9Machine Screw
- 5305-00-310-6421 MPN HT74028L8-7Close Tolerance Screw
- 5305-01-054-6254 MPN SC1776-7-8Close Tolerance Screw
- 5305-01-077-5317 MPN HT8137-3-13ASClose Tolerance Screw
- 5305-01-190-4561 MPN SC2174V08-7Machine Screw
- 5305-01-219-7177 MPN SC1779-5-24Close Tolerance Screw
- 5305-01-303-6352 MPN SC1823-3-6PClose Tolerance Screw
- 5305-01-329-9746 MPN SC5027-4-8AClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-083-6363 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
VT1696-6-12 | Alcoa Global Fasteners, Inc. |
C9535-6-12 | Lockheed Martin Corporation |
SC1776-12 | Arconic Global Fasteners & Rings, |
PBF1198-6-12 | Sps Technologies, Llc |
121754-6-12 | Sps Technologies, Llc |
121754-6-12 | Sps Technologies, Llc |
SF120-6-12 | Saturn Fasteners Inc |
C9535-6-12 | Pilgrim Screw Corporation |