NSN 5305-01-118-4908
High Torque Screw
Between 1.334 inches and 1.381 inches fastener length, flat countersunk head style, between 0.447 inches and 0.507 inches head diameter, grip diameter: between 0.2483 inches and 0.2492 inches .
Manufacturer part number 106706H-4-A15 for national stock number 5305011184908.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-118-4908.
-
MPN or Model
106706H-4-A15
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.386 inches and 0.453 inches -
Fastener Length
Between 1.334 inches and 1.381 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.447 inches and 0.507 inches -
Grip Diameter
Between 0.2483 inches and 0.2492 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
Between 0.928 inches and 0.948 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches grip -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp h11 -
Material Specification
Ams6487 assn standard single material response -
Surface Treatment
Cadmium or cadmium and chromate -
Surface Treatment Specification
Nas672 assn standard 1st treatment response or mil-c-8837, type 2, class 2 military specification 2nd treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-144-0349 MPN NAS1133-1Close Tolerance Screw
- 5305-00-262-3240 MPN E125-206Machine Screw
- 5305-00-815-2931 MPN NAS1123-3HClose Tolerance Screw
- 5305-00-915-2607 MPN NAS1123C3Close Tolerance Screw
- 5305-00-944-5905 MPN 53B333-6Machine Screw
- 5305-01-012-1549 MPN F0Z7500-10-B-5Panel Screw Assembly
- 5305-01-076-4889 MPN NAS1101-08-26Machine Screw
- 5305-01-129-7599 MPN HT4025L7-16Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-118-4908 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
106706H-4-A15 | Sps Technologies, Llc |
HT8171-4-15 | Alcoa Global Fasteners, Inc. |
H148-4-15 | Huck International, Inc. |
106706H-4-A15 | Sps Technologies, Llc |
GB510BC4-15 | Northrop Grumman Systems Corporation |
H148-4-15 | Huck Intl Inc |
HT8171-4-15 | Alcoa Global Fasteners, Inc. |
106706H-4-A15 | Sps Technologies, Llc |
GB510BC4-15 | Northrop Grumman Systems Corporation |
106706H-4-A15 | Sps Technologies, Llc |
H148-4-15 | Huck Intl Inc |