NSN 5305-01-128-5128
High Torque Screw
Furnished with one oring.
Manufacturer part number HT4020-7-23A for national stock number 5305011285128.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-128-5128.
-
MPN or Model
HT4020-7-23A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.630 inches and 0.697 inches -
Fastener Length
Between 2.078 inches and 2.125 inches -
Head Style
Flat countersunk undercut -
Head Diameter
Between 0.881 inches and 0.888 inches -
Head Height
Between 0.130 inches and 0.133 inches -
Grip Diameter
Between 0.4365 inches and 0.4370 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.438 inches -
Grip Length
Between 1.428 inches and 1.448 inches -
Thready Qty Per Inch (tpi)
20 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp xm-13 -
Material Specification
Ams5629 assn standard single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-680-5873 MPN BACB30LU4D17Machine Screw
- 5305-01-046-2080 MPN HT4010-6-7Shoulder Screw
- 5305-01-056-5452 MPN BACB30LU5-4Close Tolerance Screw
- 5305-01-062-3348 MPN BACB30UW5P40Close Tolerance Screw
- 5305-01-158-6762 MPN SC2163-3-8Machine Screw
- 5305-01-179-0907 MPN HS4727-3-2Machine Screw
- 5305-01-328-6171 MPN SC1785R-08-03Machine Screw
- 5305-01-348-6817 MPN CHT4068-5-7Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-128-5128 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4020-7-23A | Arconic Global Fasteners & Rings, |
HT4020-7-23A | Hi-shear Corporation |
HT4020-7-23A | Sps Technologies, Llc |
HT4020-7-23A | Lisi Aerospace Canada Corp |
HT4020-7-23A | Huck Intl Inc |
HT4020-7-23A | Alcoa Global Fasteners, Inc. |
ST3M652C7-23A | Huck International, Inc. |
HT4020-7-23A | Sps Technologies, Llc |
ST3M652C7-23A | Alcoa Global Fasteners, Inc. |
ST3M652C7-23A | Sps Technologies Ltd Tj Brooks |
ST3M652C7-23A | Boeing Company, The |
HT4020-7-23A | Sps Technologies Inc |