NSN 5305-01-132-0511
High Torque Screw
Furnished with one positive locking ring.
Manufacturer part number LB35-4-17 for national stock number 5305011320511.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-132-0511.
-
MPN or Model
LB35-4-17
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.351 inches and 0.371 inches -
Fastener Length
Between 1.552 inches and 1.572 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.502 inches and 0.507 inches -
Grip Diameter
Between 0.2487 inches and 0.2492 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Internal Drive Style
Hexagon -
Thread Diameter
0.250 inches -
Grip Length
Between 1.062 inches and 1.078 inches -
Width Across Flats
0.250 inches -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
100.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.453 inches first hole -
Surface Finish
63.0 microinches grip -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-052-4261 MPN NAS1207-38Close Tolerance Screw
- 5305-00-106-6238 MPN 51B293-6Close Tolerance Screw
- 5305-00-144-4096 MPN HT4UA47Close Tolerance Screw
- 5305-00-823-5808 MPN NAS1102-06-12Machine Screw
- 5305-00-928-9649 MPN NAS1221-3-6PMachine Screw
- 5305-00-985-4189 MPN HT8A25Machine Screw
- 5305-01-004-8712 MPN NAS1189-4P7LSocket Head Cap Screw
- 5305-01-076-4943 MPN HT4016-5-10Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-132-0511 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LB35-4-17 | Hi-shear Corporation |
AS301-4-17 | Avibank Mfg., Inc. |
ST3M791C4-17 | Boeing Company, The |
10115302 | Nimikkeistokeskus Ncb Finland |