NSN 5305-01-136-7150
High Torque Screw
Between 1.708 inches and 1.755 inches fastener length, flat countersunk head style, between 0.447 inches and 0.507 inches head diameter, grip diameter: between 0.2483 inches and 0.2492 inches .
Manufacturer part number H148-4-21 for national stock number 5305011367150.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-136-7150.
-
MPN or Model
H148-4-21
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.386 inches and 0.453 inches -
Fastener Length
Between 1.708 inches and 1.755 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.447 inches and 0.507 inches -
Grip Diameter
Between 0.2483 inches and 0.2492 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
Between 1.302 inches and 1.322 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches grip -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium or cadmium and chromate -
Surface Treatment Specification
Nas 672 assn standard 1st treatment response or mil-c-8837 type 2 cl 2 military specification 2nd treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-505-3972 MPN LS15235C4-27Close Tolerance Screw
- 5305-00-505-4133 MPN LS15232C3-7Machine Screw
- 5305-00-520-2317 MPN DRB7500-8-A-3Panel Screw Assembly
- 5305-00-680-5889 MPN BACB30LU-4D-35Machine Screw
- 5305-00-971-7414 MPN NAS1189-08T6Socket Head Cap Screw
- 5305-01-027-2004 MPN BM33024V3-13Close Tolerance Screw
- 5305-01-035-9549 MPN HT4048-5D-16Close Tolerance Screw
- 5305-01-049-2279 MPN HT4008-4-18Shoulder Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-136-7150 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
H148-4-21 | Huck International, Inc. |
106706H-4-A21 | Sps Technologies, Llc |
HT8171-4-21 | Alcoa Global Fasteners, Inc. |
GB510BC4-21 | Northrop Grumman Systems Corporation |
H148-4-21 | Huck Intl Inc |
106706H-4-A21 | Sps Technologies, Llc |
106706H-4-A21 | Sps Technologies, Llc |
HT8171-4-21 | Alcoa Global Fasteners, Inc. |
GB510BC4-21 | Northrop Grumman Systems Corporation |
106706H-4-A21 | Sps Technologies, Llc |
H148-4-21 | Huck Intl Inc |