NSN 5305-01-163-7424
High Torque Screw
Bearing surface of head to be grooved to 0.323 in. Min 0.325 in. Max dia,0.050 in. Min 0.055 in. Max from top of head.
Manufacturer part number AIC1023H4-7 for national stock number 5305011637424.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-163-7424.
-
MPN or Model
AIC1023H4-7
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.352 inches and 0.402 inches -
Fastener Length
Between 0.800 inches and 0.830 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.412 inches and 0.439 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.428 inches and 0.448 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Countersink Angle
60.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp h11 -
Material Specification
Ams6485 assn standard single material response -
Surface Treatment
Cadmium and nickel -
Surface Treatment Specification
Ams2416 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-082-1897 MPN 3MFR509-10R9Machine Screw
- 5305-00-809-0732 MPN 51B333-16Machine Screw
- 5305-01-056-4415 MPN C7984-3-2Close Tolerance Screw
- 5305-01-101-0726 MPN AIC811-04-31Socket Head Cap Screw
- 5305-01-148-7466 MPN BACB30LU6-3Close Tolerance Screw
- 5305-01-266-8381 MPN LD111-0044-2303Close Tolerance Screw
- 5305-01-284-2488 MPN BACB30MS8S12Close Tolerance Screw
- 5305-01-418-9140 MPN TX1026V3-24Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-163-7424 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AIC1023H4-7 | Sps Technologies, Llc |
HR101H4-7 | Hi-shear Corporation |
64040H4-7 | Sps Technologies, Llc |
VT1039H4-7 | Alcoa Global Fasteners, Inc. |
CS318642H4-7 | Textron Fastening Systems |
HR101H4-7 | Lisi Aerospace Canada Corp |
C387H4-7 | Lockheed Martin Corporation |
64040H4-7 | Sps Technologies, Llc |