NSN 5305-01-173-3596
High Torque Screw
3 keyways 0.931 in. Min and 0.961 in. Max long,0.040 in. Min and 0.044 in. Max wide machined in shank. Bore machined in thread end to receive plug.
Manufacturer part number FIT01-0003-4008 for national stock number 5305011733596.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-173-3596.
-
MPN or Model
FIT01-0003-4008
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.516 inches and 0.556 inches -
Fastener Length
Between 1.026 inches and 1.046 inches -
Head Style
Oval countersunk -
Head Diameter
Between 0.355 inches and 0.397 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Internal Drive Style
Hexagon -
Thread Diameter
0.250 inches -
Grip Length
Between 0.490 inches and 0.510 inches -
Width Across Flats
Between 0.157 inches and 0.159 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
100.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams5732 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-840-5962 MPN CA1170-04-9Externally Relieved Body Screw
- 5305-01-382-9722 MPN CA2230-10-8-12Setscrew
- 5305-01-526-3993 MPN CA2215C06-2-7Hexag Captive Screw
- 5306-00-300-2692 MPN CA4510-5-75Close Tolerance Bolt
- 1560-00-121-3504 MPN 54-14028-1Wing Bolting Angle
- 1560-00-525-9713 MPN 159-54226-1Switch Ope Trigger
- 1560-01-136-0093 MPN 192-52348Fitting Assembly
- 4920-01-172-6739 MPN R-TBD-784Interface Device Adapter Assembly
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
![Mechanic Bill explains High Torque Screw](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5305-01-173-3596 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
FIT01-0003-4008 | Fastener Innovation Technology, Inc. |
CA2194-4-08 | Arconic Global Fasteners & Rings, |
LE111-0003-4008 | Boeing Company, The |
Stock Check
![](/public/images/partscage_shelf3.png)