NSN 5305-01-176-2463
High Torque Screw
Between 1.953 inches and 1.983 inches fastener length, oval countersunk head style, between 0.297 inches and 0.302 inches head diameter, grip diameter: between 0.1890 inches and 0.1895 inches .
Manufacturer part number HT4024L3-25 for national stock number 5305011762463.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-176-2463.
-
MPN or Model
HT4024L3-25
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.381 inches and 0.431 inches -
Fastener Length
Between 1.953 inches and 1.983 inches -
Head Style
Oval countersunk -
Head Diameter
Between 0.297 inches and 0.302 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.190 inches -
Grip Length
Between 1.552 inches and 1.572 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1680-01-116-4503 MPN 200759Extension Unit Barrel
- 5305-00-505-3382 MPN LS15234C3-15Close Tolerance Screw
- 5305-00-902-6577 MPN 51B221-50HMachine Screw
- 5305-01-023-7355 MPN F7500-12C6Panel Screw Assembly
- 5305-01-047-0482 MPN HT4011-6-13Close Tolerance Screw
- 5305-01-073-5059 MPN HT4016-4-11XShoulder Screw
- 5305-01-141-7916 MPN HT4016-3-1XShoulder Screw
- 5305-01-215-6946 MPN 965370-1CScrew
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-176-2463 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4024L3-25 | Hi-shear Corporation |
HT4024L3-25 | Sps Technologies, Llc |
HT4024L3-25 | Alcoa Global Fasteners, Inc. |
HT4024L3-25 | Lisi Aerospace Canada Corp |
HT4024L3-25 | Huck International, Inc. |
11907-3L-25-1 | Reid Products Inc. |
ST3M455-3L-25-1 | Boeing Company, The |
HT4024L3-25 | Huck Intl Inc |