NSN 5305-01-186-9165
High Torque Screw
3 keyways 0.996 in. Min. And 1.016 in. Max,long. 0.040 in. Min and 0.044 in. Max wide machined in shank. Bore machine in thread end to recieve plug.
Manufacturer part number CA21017-4-08 for national stock number 5305011869165.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-186-9165.
-
MPN or Model
CA21017-4-08
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.516 inches and 0.556 inches -
Fastener Length
Between 1.026 inches and 1.046 inches -
Head Style
Pan no. 2 -
Head Diameter
Between 0.477 inches and 0.492 inches -
Head Height
Between 0.140 inches and 0.150 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Internal Drive Style
Hexagon -
Thread Diameter
0.250 inches -
Grip Length
Between 0.490 inches and 0.510 inches -
Width Across Flats
Between 0.157 inches and 0.159 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams 5732 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1680-01-535-6804 MPN CA17248-6-8-2Turnlock Receptacle
- 5305-00-151-8653 MPN CA2630-0456Close Tolerance Screw
- 5305-00-799-3222 MPN CA28080-3-7PPanel Screw Assembly
- 5305-01-170-3824 MPN CA21062-08-6-16Close Tolerance Screw
- 5320-01-462-5210 MPN CA21367-4TSPin-rivet
- 1560-00-187-7267 MPN 151-34381Aircraft Door
- 1560-00-192-6012 MPN 151-34652Gear Retainer
- 1680-00-476-1611 MPN 265-522079-11Bell Crank
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-186-9165 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
CA21017-4-08 | Arconic Global Fasteners & Rings, |
FIT01-0001-4008 | Fastener Innovation Technology, Inc. |
LE111-0001-4008 | Boeing Company, The |
CA21017-4-08 | Fastener Innovation Technology, Inc. |