NSN 5305-01-195-5060
High Torque Screw
Between 0.532 inches and 0.579 inches fastener length, flat countersunk head style, between 0.376 inches and 0.385 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number BM19031-3-5 for national stock number 5305011955060.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-195-5060.
-
MPN or Model
BM19031-3-5
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.210 inches and 0.277 inches -
Fastener Length
Between 0.532 inches and 0.579 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.376 inches and 0.385 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.190 inches -
Grip Length
Between 0.302 inches and 0.322 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel -
Material Specification
23-105, type 1, fscm 76301 mfr ref single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Mac p.S.13145, fscm 76301 mfr ref single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1680-01-242-9655 MPN 200778-6Port End Extension
- 5305-00-008-5882 MPN NAS1101E04-4PMachine Screw
- 5305-00-300-2219 MPN BACB30LU4-11Close Tolerance Screw
- 5305-00-316-7351 MPN E125-156Machine Screw
- 5305-00-469-3662 MPN NAS1123-10Close Tolerance Screw
- 5305-00-514-5436 MPN LS15235C3-6Close Tolerance Screw
- 5305-00-526-0711 MPN HT4024L6-9Close Tolerance Screw
- 5305-00-982-3093 MPN NAS1189C3P12LSocket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-195-5060 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BM19031-3-5 | Huck International, Inc. |
ST3M562-3-5 | Boeing Company, The |
HT8177-3-5 | Alcoa Global Fasteners, Inc. |
HT309-3-5 | Hi-shear Corporation |
73991H-3-5 | Sps Technologies, Llc |
HT309-3-5 | Lisi Aerospace Canada Corp |
BM19031-3-5 | Huck Intl Inc |