NSN 5305-01-214-7895
High Torque Screw
Between 0.510 inches and 0.557 inches fastener length, flat countersunk head style, between 0.339 inches and 0.381 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number SC1827-3-3 for national stock number 5305012147895.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-214-7895.
-
MPN or Model
SC1827-3-3
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.312 inches and 0.379 inches -
Fastener Length
Between 0.510 inches and 0.557 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.339 inches and 0.381 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.178 inches and 0.198 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp h11 -
Material Specification
Ams6487 assn standard single material response -
Surface Treatment
Aluminum or aluminum and chromate -
Surface Treatment Specification
Ams2506 assn standard 1st treatment response or mil-c-83488, type 2, class 3 military specification 2nd treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-144-0309 MPN 202-15522-4-13Close Tolerance Screw
- 5305-00-808-7663 MPN 51B334-14Close Tolerance Screw
- 5305-00-915-2037 MPN 51B223-33HMachine Screw
- 5305-01-158-6763 MPN SC2671-3-16Machine Screw
- 5305-01-197-6512 MPN BACB30NT4-10Close Tolerance Screw
- 5305-01-217-2185 MPN BACB30LU8-8Close Tolerance Screw
- 5305-01-237-2782 MPN HT4057-4-11AClose Tolerance Screw
- 5305-01-254-1365 MPN HT4057-5L-8Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
![Mechanic Bill explains High Torque Screw](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5305-01-214-7895 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
SC1827-3-3 | Arconic Global Fasteners & Rings, |
PBF1208-3-3 | Sps Technologies, Llc |
HR205-3-3 | Hi-shear Corporation |
122573-3-3 | Sps Technologies, Llc |
HR205-3-3 | Lisi Aerospace Canada Corp |
GB510BY3-3 | Northrop Grumman Systems Corporation |
Stock Check
![](/public/images/partscage_shelf3.png)