NSN 5305-01-231-7417
High Torque Screw
Assembled with one o-ring per st7m251,fscm 76301; lubricated with cetyl alcohol.
Manufacturer part number HT4067-4-13A for national stock number 5305012317417.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-231-7417.
-
MPN or Model
HT4067-4-13A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.444 inches and 0.494 inches -
Fastener Length
Between 1.266 inches and 1.296 inches -
Head Style
Flat countersunk undercut -
Head Diameter
Between 0.502 inches and 0.507 inches -
Head Height
Between 0.071 inches and 0.073 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
Between 0.802 inches and 0.822 inches -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp xm-13 -
Material Specification
Ams5629 assn standard single material response -
Surface Treatment
Aluminum and chromate -
Surface Treatment Specification
Mil-c-83488, type 2, class 3 military specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-060-4671 MPN HT408-4-8Machine Screw
- 5305-00-395-3356 MPN HT4024L4-3Close Tolerance Screw
- 5305-00-484-1957 MPN LS15265V4-26Close Tolerance Screw
- 5305-00-508-6231 MPN LS15266V3-8Close Tolerance Screw
- 5305-00-815-4327 MPN 32-33027-43Shoulder Screw
- 5305-01-025-6961 MPN HT4049-4D14Close Tolerance Screw
- 5305-01-025-6962 MPN HT4049-4D15Close Tolerance Screw
- 5305-01-056-4415 MPN C7984-3-2Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-231-7417 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4067-4-13A | Huck International, Inc. |
HT4067-4-13A | Arconic Global Fasteners & Rings, |
HT4067-4-13A | Sps Technologies, Llc |
HT4067-4-13A | Hi-shear Corporation |
3M925C4-13A | Boeing Company, The |
11881C4-13A | Reid Products Inc. |
HT4067-4-13A | Lisi Aerospace Canada Corp |
HT4067-4-13A | Huck Intl Inc |
HT4067-4-13A | Alcoa Global Fasteners, Inc. |