NSN 5305-01-241-1523
High Torque Screw
Between 1.814 inches and 1.844 inches fastener length, flat countersunk head style, between 0.752 inches and 0.762 inches head diameter, grip diameter: between 0.3740 inches and 0.3745 inches .
Manufacturer part number ST3M454-6L19 for national stock number 5305012411523.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-241-1523.
-
MPN or Model
ST3M454-6L19
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.616 inches and 0.666 inches -
Fastener Length
Between 1.814 inches and 1.844 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.752 inches and 0.762 inches -
Grip Diameter
Between 0.3740 inches and 0.3745 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.375 inches -
Grip Length
Between 1.178 inches and 1.198 inches -
Thready Qty Per Inch (tpi)
24 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp xm-13 -
Material Specification
Ams5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-324-8486 MPN HT8137-3-6Close Tolerance Screw
- 5305-00-834-0129 MPN 53B333-3Machine Screw
- 5305-01-025-6960 MPN HT4049-4D11Close Tolerance Screw
- 5305-01-044-4418 MPN BACB30LH3U2Close Tolerance Screw
- 5305-01-210-1658 MPN HT4060V3-5DShoulder Screw
- 5305-01-393-0785 MPN SC3102-5-9Close Tolerance Screw
- 5305-01-433-3318 MPN 3M1169V3-19AClose Tolerance Screw
- 5305-01-447-6589 MPN TX1027V4-16AClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-241-1523 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
ST3M454-6L19 | Fastener Innovation Technology, Inc. |
HT4025L6-19 | Sps Technologies, Llc |
HT4025L6-19 | Hi-shear Corporation |
ST3M454-6L19 | Boeing Company, The |
HT4025L6-19 | Arconic Global Fasteners & Rings, |
HT4025L6-19 | Huck International, Inc. |
ST3M454-6L19 | Houston Precision Fasteners I, Lp |
11905-6L19 | Reid Products Inc. |
WC4025L-6-19 | West Coast Aerospace Inc |
HT4025L6-19 | Lisi Aerospace Canada Corp |
10113574 | Nimikkeistokeskus Ncb Finland |
HT4025L6-19 | Alcoa Global Fasteners, Inc. |