NSN 5305-01-241-3975
High Torque Screw
Between 1.376 inches and 1.406 inches fastener length, flat countersunk head style, between 0.752 inches and 0.762 inches head diameter, grip diameter: between 0.3740 inches and 0.3745 inches .
Manufacturer part number ST3M454-6DL12 for national stock number 5305012413975.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-241-3975.
-
MPN or Model
ST3M454-6DL12
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.616 inches and 0.666 inches -
Fastener Length
Between 1.376 inches and 1.406 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.752 inches and 0.762 inches -
Grip Diameter
Between 0.3740 inches and 0.3745 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole and 0.111 inches first hole -
Internal Drive Style
High-torque -
Thread Diameter
0.375 inches -
Grip Length
Between 0.740 inches and 0.760 inches -
Thready Qty Per Inch (tpi)
24 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.251 inches first hole and 1.291 inches first hole -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-505-2678 MPN LS15262V4-10Machine Screw
- 5305-00-536-7266 MPN HT4024L7-7Close Tolerance Screw
- 5305-00-935-7579 MPN HT409A4-19Shoulder Screw
- 5305-01-051-1761 MPN SC1776-6-18Close Tolerance Screw
- 5305-01-054-6292 MPN C7984-4-9Close Tolerance Screw
- 5305-01-129-7597 MPN HT8140-7-12Close Tolerance Screw
- 5305-01-143-0608 MPN 3M958-4-8Shoulder Screw
- 5305-01-167-2405 MPN ST3M454-5L-7Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-241-3975 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
ST3M454-6DL12 | Boeing Company, The |
HT4025L6D12 | Sps Technologies, Llc |
ST3M454-6DL12 | Karg Corp |
WC4025L6D12 | West Coast Aerospace Inc |
HT4025L6D12 | Huck Intl Inc |
HT4025L6D12 | Hi-shear Corporation |
HT4025L6D12 | Lisi Aerospace Canada Corp |
ST3M454-6DL12 | Arconic Global Fasteners & Rings, |
11905-6DL12 | Reid Products Inc. |
ST3M454-6DL12 | West Coast Aerospace Inc |
10113575 | Nimikkeistokeskus Ncb Finland |
HT4025L6D12 | Alcoa Global Fasteners, Inc. |
HT4025L6D12 | Huck International, Inc. |