NSN 5305-01-273-2282
High Torque Screw
Between 1.173 inches and 1.220 inches fastener length, flat countersunk head style, between 0.464 inches and 0.507 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number HR203-4-13D for national stock number 5305012732282.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-273-2282.
-
MPN or Model
HR203-4-13D
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.351 inches and 0.418 inches -
Fastener Length
Between 1.173 inches and 1.220 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.464 inches and 0.507 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Shank Unthreaded Hole Diameter
0.071 inches first hole and 0.081 inches first hole -
Internal Drive Style
Torque-set ribbed -
Thread Diameter
0.250 inches -
Grip Length
Between 0.802 inches and 0.822 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
156000 pounds per square inch -
Hardness Rating
51.0 rockwell c and 54.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.005 inches first hole and 1.037 inches first hole -
Surface Finish
32.0 microinches threads -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Mil-c-8837, type 2 class 2 military specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 4820-00-023-6362 MPN 2632-912X1PC7-1-2 INL1Valve Stem
- 4820-00-040-8488 MPN SS845-2110239PC14TFN1INQ3Valve Seat
- 4820-00-045-5181 MPN 2620-927X2ASSY6TL1Check Valve
- 4820-00-054-3725 MPN 803-5001003-X9X1-07AL1Valve Stem
- 5940-00-215-5959 MPN SYMBOL 435.1Terminal Box
- 5935-00-237-5124 MPN 1113-3162Electrical Plug Connector
- 4820-00-287-5341 MPN 271-5901-958524Globe Valve
- 4820-00-925-2104 MPN 845-2445066ASSYIRB-4INL1Globe Valve
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-273-2282 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HR203-4-13D | Hi-shear Corporation |
HR203-4-13D | Lisi Aerospace Canada Corp |
GB510DE4-13D | Northrop Grumman Systems Corporation |
SCD1780-4-13D | Arconic Global Fasteners & Rings, |
PBF1360-4-13D | Sps Technologies, Llc |
122995D-4-13D | Sps Technologies, Llc |
HR203-4-13D | Naval Inventory Control Point |
HR203-4-13D | Hi-shear Corporation |