NSN 5305-01-282-3893
High Torque Screw
Between 0.829 inches and 0.859 inches fastener length, flat countersunk head style, between 0.376 inches and 0.385 inches head diameter, grip diameter: between 0.1890 inches and 0.1895 inches .
Manufacturer part number HT4025L3D7 for national stock number 5305012823893.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-282-3893.
-
MPN or Model
HT4025L3D7
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.381 inches and 0.431 inches -
Fastener Length
Between 0.829 inches and 0.859 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.376 inches and 0.385 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Shank Unthreaded Hole Diameter
0.070 inches first hole and 0.075 inches first hole -
Internal Drive Style
High-torque -
Thread Diameter
0.190 inches -
Grip Length
Between 0.428 inches and 0.448 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.708 inches first hole and 0.748 inches first hole -
Material
Steel comp xm-13 -
Material Specification
Ams5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-106-2355 MPN 11883-6-12/11883-6L12Close Tolerance Screw
- 5305-01-141-7901 MPN 11879C6-18AShoulder Screw
- 5305-01-142-8400 MPN 11879C7-18AShoulder Screw
- 5305-01-143-6539 MPN 11905-3L18Close Tolerance Screw
- 5305-01-268-5976 MPN 11879C5-11DShoulder Screw
- 5305-01-280-6739 MPN 11883-4DL17Close Tolerance Screw
- 5305-01-462-2743 MPN 11855V3-4 118Machine Screw
- 5305-01-469-6477 MPN 11839C3-7-18Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-282-3893 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4025L3D7 | Sps Technologies, Llc |
HT4025L3D7 | Alcoa Global Fasteners, Inc. |
ST3M454-3DL7 | Boeing Company, The |
11905-3DL7 | Reid Products Inc. |
ST3M454-3DL7 | Hi-shear Corporation |
ST3M454-3DL7 | Sps Technologies, Llc |
ST3M454-3DL7 | Alcoa Global Fasteners, Inc. |
ST3M454-3DL7 | Lisi Aerospace Canada Corp |
HT4025L3D7 | Hi-shear Corporation |