NSN 5305-01-304-1326
High Torque Screw
Between 0.766 inches and 0.796 inches fastener length, flat countersunk head style, between 0.376 inches and 0.385 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number 3M1165-3-6F for national stock number 5305013041326.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-304-1326.
-
MPN or Model
3M1165-3-6F
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.381 inches and 0.431 inches -
Fastener Length
Between 0.766 inches and 0.796 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.376 inches and 0.385 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.365 inches and 0.385 inches -
Features Provided
Cetyl alcohol lubricant -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Stainless steel -
Surface Treatment
Aluminum and chromate -
Surface Treatment Specification
Mil-c-83488 type 2 cl 3 military specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-049-9852 MPN 152293Machine Screw
- 5305-00-455-0382 MPN AIC4533-6-1Shoulder Screw
- 5305-00-808-7663 MPN 51B334-14Close Tolerance Screw
- 5305-01-013-3187 MPN LS15265V3-20Close Tolerance Screw
- 5305-01-025-6960 MPN HT4049-4D11Close Tolerance Screw
- 5305-01-056-2952 MPN BACB30LU3-15Close Tolerance Screw
- 5305-01-176-7382 MPN HT4025L3-12Close Tolerance Screw
- 5305-01-288-5723 MPN AIC9535-7-26Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-304-1326 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
3M1165-3-6F | Boeing Company, The |
3M1165-3-6F | Sps Technologies, Llc |
HR249BJ-3-6 | Hi-shear Corporation |
HR249BJ-3-6 | Lisi Aerospace Canada Corp |
AIC1165-3-6P | Sps Technologies, Llc |
SC5087-3-6P | Arconic Global Fasteners & Rings, |
VT1730-3-6P | Alcoa Global Fasteners, Inc. |
HR249-3-6BJ | Hi-shear Corporation |
3M1165-3-6P | Boeing Company, The |