NSN 5305-01-314-0893
High Torque Screw
Between 1.073 inches and 1.103 inches fastener length, flat countersunk head style, between 0.2083 inches and 0.2612 inches head diameter, grip diameter: between 0.1625 inches and 0.1635 inches .
Manufacturer part number NAS1992C12T for national stock number 5305013140893.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-314-0893.
-
MPN or Model
NAS1992C12T
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.313 inches and 0.363 inches -
Fastener Length
Between 1.073 inches and 1.103 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.2083 inches and 0.2612 inches -
Grip Diameter
Between 0.1625 inches and 0.1635 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.164 inches -
Grip Length
Between 0.740 inches and 0.760 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
39.0 rockwell c and 43.0 rockwell c -
Minimum Yield Strength
108000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams 5731 assn standard single material response or ams 5737 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjc -
Specification Data
80205-nas1992 professional/industrial association standard
More from these suppliers
- 5940-00-056-8696 MPN NAS1746-3Conductor Splice
- 5985-01-192-2031 MPN 5035749-3Antenna Position Programmer
- 5940-01-372-2503 MPN NAS1063B-61-80Terminal Board Marker Strip
- 5940-01-413-3010 MPN NAS1063B249-258Terminal Board Marker Strip
- 5935-01-577-3543 MPN MS27488-20-2Electrical Connector End Seal Plug
- 5305-00-008-5906 MPN NAS1189C02T6LSocket Head Cap Screw
- 5305-00-008-5914 MPN NAS1100C06-28Machine Screw
- 5305-00-045-3181 MPN MS24694S100Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
![Mechanic Bill explains High Torque Screw](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5305-01-314-0893 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1992C12T | National Aerospace Standards |
Stock Check
![](/public/images/partscage_shelf3.png)
- NE: 679