NSN 5305-01-327-5691
High Torque Screw
Between 1.062 inches and 1.092 inches fastener length, flat countersunk head style, between 0.328 inches and 0.385 inches head diameter, grip diameter: between 0.1890 inches and 0.1895 inches .
Manufacturer part number X007-3-13 for national stock number 5305013275691.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-327-5691.
-
MPN or Model
X007-3-13
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.345 inches -
Fastener Length
Between 1.062 inches and 1.092 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.328 inches and 0.385 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.802 inches and 0.822 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Nickel alloy 718 -
Material Specification
Ams 5662 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-514-8251 MPN LS15267V3-22Machine Screw
- 5305-01-435-6321 MPN BACB30LU9-22Close Tolerance Screw
- 5306-00-150-3595 MPN GB511B20D36Shear Bolt
- 5306-00-505-9803 MPN J646P20AMachine Bolt
- 5306-00-964-1214 MPN GYS9-103Machine Bolt
- 5306-01-045-6569 MPN VAL23608-5-5Shoulder Bolt
- 5306-01-046-5296 MPN VAL23608-5D16Shoulder Bolt
- 5306-01-054-3418 MPN VCG0009L6-12Shear Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-327-5691 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
X007-3-13 | Huck International, Inc. |
AIC4410-3-13 | Sps Technologies, Llc |
VCL0008-3-13 | Valley-todeco, Inc. |
PBF1419-3-13 | Sps Technologies, Llc |
HR242-3-13 | Hi-shear Corporation |
HR242-3-13 | Lisi Aerospace Canada Corp |
X007-3-13 | Huck Intl Inc |
SLB217-3-13 | Space-lok, Inc. |
03A161-3-13 | Northrop Grumman Systems Corporation |
123741-3-13 | Sps Technologies, Llc |