NSN 5305-01-349-7655
High Torque Screw
Between 0.642 inches and 0.672 inches fastener length, flat countersunk head style, between 0.311 inches and 0.357 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number AIC4411-3-5 for national stock number 5305013497655.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-349-7655.
-
MPN or Model
AIC4411-3-5
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.345 inches -
Fastener Length
Between 0.642 inches and 0.672 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.311 inches and 0.357 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.302 inches and 0.322 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches bearing surface of head32.0 microinches grip32.0 microinches threads -
Material
Nickel alloy 718 -
Material Specification
Ams 5662 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-487-5269 MPN AIC1023H4-20Close Tolerance Screw
- 5305-00-492-8744 MPN NAS1101-06-7BMachine Screw
- 5305-00-505-2935 MPN LS15264V3-5Machine Screw
- 5305-00-505-3196 MPN LS15264V3-14Machine Screw
- 5305-00-810-1266 MPN 51B334-40HClose Tolerance Screw
- 5305-01-070-6441 MPN A1C812-3-10Machine Screw
- 5305-01-135-6490 MPN HT4025L-4-14Close Tolerance Screw
- 5305-01-334-1051 MPN AIC1701-3-2Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-349-7655 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AIC4411-3-5 | Sps Technologies, Llc |
03A199-3-5 | Northrop Grumman Systems Corporation |
03A199-3-5 | Sps Technologies, Llc |
03A199-3-5 | Northrop Grumman Systems Corporation |
SC3104-3-5 | Arconic Global Fasteners & Rings, |
124870-3-5 | Sps Technologies, Llc |
SLB215-3-5 | Space-lok, Inc. |
PBF1483-3-5 | Sps Technologies, Llc |