NSN 5305-01-351-3522
High Torque Screw
Between 0.950 inches and 0.980 inches fastener length, flat countersunk head style, between 0.350 inches and 0.399 inches head diameter, grip diameter: between 0.2490 inches and 0.2495 inches .
Manufacturer part number VCL0010-4-9 for national stock number 5305013513522.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-351-3522.
-
MPN or Model
VCL0010-4-9
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
139820 - Nickel Bolts/nails/nuts/rivets Etc -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.403 inches -
Fastener Length
Between 0.950 inches and 0.980 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.350 inches and 0.399 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.552 inches and 0.572 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches bearing surface of head32.0 microinches grip32.0 microinches threads -
Material
Nickel alloy 718 -
Material Specification
Ams 5662 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1680-01-501-4903 MPN 3M943C4G3-4Headle Shoulder Pin
- 5305-00-508-5041 MPN LS15267V3-32Machine Screw
- 5305-01-435-6321 MPN BACB30LU9-22Close Tolerance Screw
- 5305-01-613-2236 MPN PMT8704-6Close Tolerance Screw
- 5305-01-628-4510 MPN 3M1170V6-15AClose Tolerance Screw
- 5306-00-848-6427 MPN R105P8NExternally Relieved Body Bolt
- 5306-00-960-5306 MPN 871C394P1Internally Relieved Body Bolt
- 5306-01-088-8919 MPN VCC0092-1-24Shear Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-351-3522 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
VCL0010-4-9 | Valley-todeco, Inc. |
PBF1502-4-9 | Sps Technologies, Llc |
124507-4-9 | Sps Technologies, Llc |
GB510FJ4-9 | Northrop Grumman Systems Corporation |
VLC0010-4-9 | Valley-todeco, Inc. |