NSN 5305-01-365-6317
High Torque Screw
Between 1.812 inches and 1.859 inches fastener length, flat countersunk head style, between 0.717 inches and 0.760 inches head diameter, grip diameter: between 0.3740 inches and 0.3745 inches .
Manufacturer part number VCL0009-6-20 for national stock number 5305013656317.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-365-6317.
-
MPN or Model
VCL0009-6-20
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.578 inches -
Fastener Length
Between 1.812 inches and 1.859 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.717 inches and 0.760 inches -
Grip Diameter
Between 0.3740 inches and 0.3745 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.375 inches -
Grip Length
Between 1.240 inches and 1.260 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches bearing surface of head32.0 microinches grip32.0 microinches threads -
Material
Steel -
Material Specification
Ams5662 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-505-3954 MPN LS15267V3-26Machine Screw
- 5305-01-435-5747 MPN BACB30LU8-25Close Tolerance Screw
- 5305-01-512-8356 MPN 3M1170D3-8AFClose Tolerance Screw
- 5306-00-928-9592 MPN VEP220121-4FH4Shear Bolt
- 5306-01-031-4850 MPN BACB30NF4-17DClose Tolerance Bolt
- 5306-01-045-2430 MPN ST3M507-4-36Shoulder Bolt
- 5306-01-052-1185 MPN VAL22034-8F15Shear Bolt
- 5306-01-054-8383 MPN BACB30LM3-6Shear Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-365-6317 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
VCL0009-6-20 | Valley-todeco, Inc. |
PBF1475-6-20 | Sps Technologies, Llc |
124379-6-20 | Sps Technologies, Llc |
GB510FG6-20 | Northrop Grumman Systems Corporation |