NSN 5305-01-373-4838
High Torque Screw
Between 1.193 inches and 1.240 inches fastener length, flat countersunk undercut head style, between 0.456 inches and 0.508 inches head diameter, head height: between 0.0713 inches and 0.0733 inches .
Manufacturer part number HT4067-4-13D for national stock number 5305013734838.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-373-4838.
-
MPN or Model
HT4067-4-13D
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.469 inches -
Fastener Length
Between 1.193 inches and 1.240 inches -
Head Style
Flat countersunk undercut -
Head Diameter
Between 0.456 inches and 0.508 inches -
Head Height
Between 0.0713 inches and 0.0733 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Single Shear Strength
125000 pounds per square inch -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
Between 0.730 inches and 0.750 inches -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches bearing surface of head32.0 microinches grip32.0 microinches threads -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Aluminum and chromate -
Surface Treatment Specification
Mil-c-83488 type 2 cl 3 military specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-083-3365 MPN HT8138-3-3Close Tolerance Screw
- 5305-00-869-3223 MPN BACS12CK3U13Machine Screw
- 5305-00-948-0766 MPN 51B335-9Machine Screw
- 5305-01-076-4945 MPN SC1810-3-3Close Tolerance Screw
- 5305-01-102-8454 MPN HT4016-3-7XShoulder Screw
- 5305-01-161-6164 MPN HT4032V4-6Close Tolerance Screw
- 5305-01-218-1441 MPN HT4060V4-7ASShoulder Screw
- 5305-01-218-4548 MPN BACB30LR4U22Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-373-4838 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4067-4-13D | Hi-shear Corporation |
HT4067-4-13D | Lisi Aerospace Canada Corp |
HT4067-4-13D | Huck International, Inc. |
HT4067-4-13D | Huck Intl Inc |
HT4067-4-13D | Sps Technologies, Llc |
HT4067-4-13D | Alcoa Global Fasteners, Inc. |
HT4067-4-13D | Arconic Global Fasteners & Rings, |