NSN 5305-01-391-7852
High Torque Screw
Dry ilm lubricant threads only.
Manufacturer part number PBF1571-4-15L for national stock number 5305013917852.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-391-7852.
-
MPN or Model
PBF1571-4-15L
-
Schedule B
8105.90.0000 (Cobalt, wrought, and articles thereof) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.403 inches -
Fastener Length
1.341 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.503 inches and 0.511 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
0.938 inches -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
Between 129.0 degrees and 131.0 degrees -
Material
Cobalt comp mp-35-n -
Surface Treatment
Passivate threads -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response threads -
Thread Series Designator
Unjf
More from these suppliers
- 4920-01-287-8282 MPN 4791993-001Test Program Set
- 5935-01-327-8284 MPN 05A108WE26PNElectrical Plug Connector
- 1680-01-364-7913 MPN DAA3297A184-009Control Pedal Assembly
- 1680-01-415-1555 MPN DAA3298A500-009Storage Container
- 5935-01-420-8161 MPN 05A265T21B41SElectrical Receptacle Connector
- 4920-01-439-5130 MPN DAA7257G373-001Aircraft Maintenance Fixture
- 1560-01-447-8555 MPN DAA3420A301-052Aircraft Tip
- 1560-01-493-3955 MPN DAA3121A613-008Aircraft Fairing
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-391-7852 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
PBF1571-4-15L | Sps Technologies, Llc |
125301-4-15L | Sps Technologies, Llc |
03A416-4-15L | Northrop Grumman Systems Corporation |
HR258-4-15L | Hi-shear Corporation |
HR258-4-15L | Lisi Aerospace Canada Corp |
03A416-4-15L | Northrop Grumman Systems Corporation |
PBF1571-4-15L | Sps Technologies, Llc |
03A416-4-15L | Northrop Grumman Systems Corporation |
HR258-4-15L | Hi-shear Corporation |
HR258-4-15L | Lisi Aerospace Canada Corp |
125301-4-15L | Sps Technologies, Llc |
PBF1571-4-15L | Sps Technologies, Llc |
03A416-4-15L | Northrop Grumman Systems Corporation |
HR258-4-15L | Hi-shear Corporation |
HR258-4-15L | Lisi Aerospace Canada Corp |
125301-4-15L | Sps Technologies, Llc |
PBF1571-4-15L | Sps Technologies, Llc |
03A416-4-15L | Northrop Grumman Systems Corporation |
HR258-4-15L | Hi-shear Corporation |
HR258-4-15L | Lisi Aerospace Canada Corp |
125301-4-15L | Sps Technologies, Llc |