NSN 5305-01-397-7495
High Torque Screw
Finish cadmium fluoborate plate.
Manufacturer part number AIC618-3-12 for national stock number 5305013977495.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-397-7495.
-
MPN or Model
AIC618-3-12
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
095190 - Hardware, NOI Sub 9 -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.363 inches -
Fastener Length
Between 1.083 inches and 1.143 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.228 inches and 0.288 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Single Shear Strength
132000 pounds per square inch -
Internal Drive Style
Offset cruciform (torque set) -
End Application
F-16 -
Thread Diameter
0.190 inches -
Grip Length
Between 0.720 inches and 0.780 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Part Name Assigned By Controlling Agency
100 degress reduced flush head, head offset cruciform recess, 132 ksi shear -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 national specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-057-1720 MPN TS705-06TCRMachine Screw
- 5305-00-150-3367 MPN AIC4533-7-2Shoulder Screw
- 5305-00-827-7963 MPN 593111Machine Screw
- 5305-00-840-5962 MPN AIC617-1Externally Relieved Body Screw
- 5305-01-004-9520 MPN 965817-107CSocket Head Cap Screw
- 5305-01-022-0147 MPN AIC617-34Externally Relieved Body Screw
- 5305-01-128-4098 MPN AIC984-5-12Close Tolerance Screw
- 5305-01-284-1391 MPN AIC984-4-7Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-397-7495 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AIC618-3-12 | Sps Technologies, Llc |
93926-3-12 | Sps Technologies, Llc |
93926-3-12 | Sps Technologies, Llc |
C20645-3-12 | Lockheed Martin Corporation |
GS1009-3-12 | B & B Specialties Inc. |
C20645-3-12 | B & B Specialties Inc. |