NSN 5305-01-409-1155
High Torque Screw
Between 0.888 inches and 0.918 inches fastener length, flat countersunk head style, between 0.325 inches and 0.385 inches head diameter, grip diameter: between 1.900 inches and 1.910 inches .
Manufacturer part number C7984-3-6R for national stock number 5305014091155.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-409-1155.
-
MPN or Model
C7984-3-6R
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.323 inches -
Fastener Length
Between 0.888 inches and 0.918 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.325 inches and 0.385 inches -
Grip Diameter
Between 1.900 inches and 1.910 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.490 inches and 0.510 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 49.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-046-9990 MPN BACB30LU2-5Close Tolerance Screw
- 5305-00-456-2431 MPN AIC813-5-R23Machine Screw
- 5305-00-487-5275 MPN AIC1023H5-13Close Tolerance Screw
- 5305-00-685-1889 MPN 314231Machine Screw
- 5305-00-840-5962 MPN A1C617-1Externally Relieved Body Screw
- 5305-00-915-2526 MPN A1C792-3-11Machine Screw
- 5305-01-015-6639 MPN AIC82-4-10Close Tolerance Screw
- 5305-01-025-6960 MPN HT4049-4D11Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-409-1155 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
C7984-3-6R | Lockheed Martin Corporation |
C7984-3-6R | Sps Technologies, Llc |
C7984-3-6R | Arconic Global Fasteners & Rings, |
C7984-3-6R | Sps Technologies, Llc |
C7984-3-6R | Sps Technologies, Llc |
C7984-3-6R | Alcoa Global Fasteners, Inc. |
Stock Check
- NS: 1
- NE: 517