NSN 5305-01-421-4215
Panel Screw
0.375 inches fastener length, flat countersunk head style, between 0.191 inches and 0.225 inches head diameter, first diameter from head: 0.101 inches .
Manufacturer part number 242B6384P1 for national stock number 5305014214215.
Datasheet
-
Product description
Externally Relieved Body Screw NSN 5305-01-421-4215.
-
MPN or Model
242B6384P1
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
0.225 inches -
Fastener Length
0.375 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.191 inches and 0.225 inches -
First Diameter From Head
0.101 inches -
Distance From Largest Bearing Surface Of Head To End Of First Diameter
Between 0.078 inches and 0.084 inches -
Internal Drive Style
Cross recess type iii -
Thread Diameter
0.112 inches -
Thready Qty Per Inch (tpi)
40 -
Min. Tensile Strength (psi)
80000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Externally Relieved Body Diameter Quantity
1 -
Color
Black -
Material
Steel comp 302 or steel comp 303 or steel comp 304 or steel comp 305 or steel comp 316 -
Surface Treatment
Paint head -
Surface Treatment Specification
Mil-c-13924 military specification single treatment response fastener -
Thread Series Designator
Unc
More from these suppliers
- 4920-00-710-0568 MPN 223E227G1Aircraft Maintenance Fixture
- 5945-00-924-4261 MPN 926C369-1Thermal Relay
- 4920-01-087-1007 MPN 293E413G1Generator Test Set
- 5905-01-519-0639 MPN 356A1416P38Film Fixed Chip Resistor
- 5905-01-549-1818 MPN 361A9954P5Film Fixed Chip Resistor
- 5905-01-463-2647 MPN 348A1200P327Film Fixed Resistor
- 5905-00-905-6423 MPN 539D780P1Nonprecision Nonwire Wound Variable Resistor
- 5905-01-463-2641 MPN 348A1200P233Film Fixed Resistor
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is no. 0 (0.060 in.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below no. 10 (0.190 in.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also bolt, externally relieved body and bolt, internal wrenching.
Pricing and Availability
Get a quote for 5305-01-421-4215 externally relieved body screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
242B6384P1 | Bae Systems Controls Inc. |
242B6384P1 | Bae Systems Controls Inc. |
242B6384P1 | Bae Systems Controls Inc. |
242B6384P1 | Bae Systems Controls Inc. |
242B6384P1 | Bae Systems Controls Inc. |
242B6384P1 | Bae Systems Controls Inc. |
242B6384P1 | Bae Systems Controls Inc. |
242B6384P1 | Bae Systems Controls Inc. |
242B6384P1 | Bae Systems Controls Inc. |
242B6384P1 | Bae Systems Controls Inc. |
242B6384P1 | Bae Systems Controls Inc. |
242B6384P1 | Bae Systems Controls Inc. |