NSN 5305-01-424-5129
High Torque Screw
Between 0.525 inches and 0.565 inches fastener length, flat countersunk head style, between 0.258 inches and 0.305 inches head diameter, grip diameter: between 0.188 inches and 0.189 inches .
Manufacturer part number AIC618-3-3 for national stock number 5305014245129.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-424-5129.
-
MPN or Model
AIC618-3-3
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Unit Weight (Est.)
10 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.348 inches and 0.378 inches -
Fastener Length
Between 0.525 inches and 0.565 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.258 inches and 0.305 inches -
Grip Diameter
Between 0.188 inches and 0.189 inches -
Internal Drive Style
Offset cruciform (torque set) -
End Application
F-16 -
Thread Diameter
0.190 inches -
Grip Length
Between 0.302 inches and 0.322 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 49.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp h11 -
Material Specification
Ams6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-450-5958 MPN AIC1023V5-13Close Tolerance Screw
- 5305-00-823-5807 MPN NAS1102-04-10Machine Screw
- 5305-01-254-2565 MPN 3M963-4L8Close Tolerance Screw
- 5305-01-334-3556 MPN 1701-3-3Close Tolerance Screw
- 5305-01-356-3189 MPN LD111-0047-0511Close Tolerance Screw
- 5305-01-369-0751 MPN LE111-0035-6306Close Tolerance Screw
- 5305-01-420-5114 MPN AIC4410-4-32PClose Tolerance Screw
- 5305-01-508-2215 MPN TX1026D6-11AClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-424-5129 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AIC618-3-3 | Sps Technologies, Llc |