NSN 5305-01-425-0731
High Torque Screw
Between 1.676 inches and 1.706 inches fastener length, flat countersunk head style, between 0.497 inches and 0.507 inches head diameter, grip diameter: between 0.2490 inches and 0.2495 inches .
Manufacturer part number HT4049-4-22 for national stock number 5305014250731.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-425-0731.
-
MPN or Model
HT4049-4-22
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.316 inches -
Fastener Length
Between 1.676 inches and 1.706 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.497 inches and 0.507 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Shank Unthreaded Hole Diameter
0.076 inches threads and 0.081 inches threads -
Internal Drive Style
High-torque -
Thread Diameter
0.2500 inches -
Grip Length
Between 1.365 inches and 1.385 inches -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.573 inches threads -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp xm-13 -
Material Specification
Ams5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 4820-00-045-5772 MPN 1S1290-5L1Stop-check Valve
- 4820-01-005-8858 MPN 3112-27-1Globe Valve
- 5935-01-021-3131 MPN 1099802GL1Electrical Connector Assembly
- 4820-01-093-1720 MPN 4642103-008L1Fluid Valve Stem
- 4820-01-111-0804 MPN 235085-0002 ITEM 1L1Interlock Assembly
- 4820-01-111-8520 MPN H547-0001-262190613-23L1Valve Stem Guide
- 4820-01-113-8846 MPN 803-2177934-C426AFL1Angle Valve
- 4820-01-126-7388 MPN B35910L1Valve Gland Assembly
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-425-0731 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4049-4-22 | Huck International, Inc. |
HT4049-4-22 | Hi-shear Corporation |
HT4049-4-22 | Sps Technologies, Llc |
HT4049-4-22 | Alcoa Global Fasteners, Inc. |
HT4049-4-22 | Lisi Aerospace Canada Corp |
11931-4-22 | Reid Products Inc. |
ST3M714-4-22 | Boeing Company, The |
HT4049-4-22 | Huck Intl Inc |
HT4049-4-22 | Alcoa Global Fasteners, Inc. |
HT4049-4-22 | Naval Inventory Control Point |
HT4049-4-22 | Alcoa Global Fasteners, Inc. |
HT4049-4-22 | Naval Inventory Control Point |
HT4049-4-22 | Alcoa Global Fasteners, Inc. |
HT4049-4-22 | Naval Inventory Control Point |
HT4049-4-22 | Alcoa Global Fasteners, Inc. |