NSN 5305-01-432-1192
High Torque Screw
Two keyways along threads 180 degrees apart, length of keyways 0.482.
Manufacturer part number CA21062-08-4-9 for national stock number 5305014321192.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-432-1192.
-
MPN or Model
CA21062-08-4-9
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.285 inches -
Fastener Length
Between 0.552 inches and 0.572 inches -
Head Style
Pan -
Head Diameter
Between 0.306 inches and 0.322 inches -
Head Height
Between 0.105 inches and 0.115 inches -
Grip Diameter
Between 0.1625 inches and 0.1635 inches -
Point Style
Half dog -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.164 inches -
Grip Length
0.125 inches -
Thready Qty Per Inch (tpi)
32 -
Material
Steel comp 304 or steel comp 305 or steel comp 310 or steel comp 316 or steel comp 304l or steel comp 302 -
Material Specification
Qq-s-763 federal specification all material responses -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unc
More from these suppliers
- 5950-00-070-6980 MPN 220-013-002Radio Frequency Transformer
- 5950-00-318-2433 MPN 050-004530Power Transformer
- 5950-00-702-5208 MPN AN343-69Radio Frequency Coil
- 5935-00-869-5280 MPN 120-001-003Electrical Plug Connector
- 5930-00-924-7535 MPN 246-003-012GR2Rotary Switch
- 5950-00-983-2731 MPN BX211-003-022Power Transformer
- 5935-01-021-2670 MPN 006-001341Plug-in Electronic Components Socket
- 5950-01-035-9935 MPN 050-004590 26916Potential Transformer
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-432-1192 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
CA21062-08-4-9 | Arconic Global Fasteners & Rings, |
003-009424-149 | Northrop Grumman Systems Corporation |
CA21062-08-4-9 | Arconic Global Fasteners & Rings, |
003-009424-149 | Northrop Grumman Systems Corporation |
CA21062-08-4-9 | Arconic Global Fasteners & Rings, |
003-009424-149 | Northrop Grumman Systems Corporation |