NSN 5305-01-435-9898
High Torque Screw
Nutplate cbore between grip and threads/captive panel fastener.
Manufacturer part number 123370-4-40 for national stock number 5305014359898.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-435-9898.
-
MPN or Model
123370-4-40
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093490 - Bolt/nut/screw/clips/fastener/etc -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.365 inches -
Fastener Length
Between 0.730 inches and 0.760 inches -
Head Style
Flat countersunk -
Head Diameter
0.466 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.240 inches and 0.260 inches -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Iron alloy 660 -
Material Specification
Ams 5731 assn standard single material response or ams 5737 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5305-00-308-1587 MPN AIC811-04-13Socket Head Cap Screw
- 5305-00-809-0693 MPN 51B333-14Close Tolerance Screw
- 5305-00-823-5809 MPN NAS1102-06-14Machine Screw
- 5305-01-338-4568 MPN BACS12GU3K37Machine Screw
- 5305-01-386-2977 MPN AIC1700-5-12Close Tolerance Screw
- 5305-01-406-3075 MPN HT4067-3-11AClose Tolerance Screw
- 5305-01-435-8675 MPN BACB30LU9-54Close Tolerance Screw
- 5305-01-452-2163 MPN LD111-0046-2418Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-435-9898 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
123370-4-40 | Sps Technologies, Llc |
SC1752-4-40 | Arconic Global Fasteners & Rings, |
S00465-4-40 | Boeing Company, The |
AIC4465-4-40 | Sps Technologies, Llc |
FIT7977-4-40 | Fastener Innovation Technology, Inc. |