NSN 5305-01-468-9360
High Torque Screw
Between 0.739 inches and 0.759 inches fastener length, flat countersunk head style, between 0.358 inches and 0.365 inches head diameter, spline minor diameter: 0.1570 inches .
Manufacturer part number TX1024D4D37-6A for national stock number 5305014689360.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-468-9360.
-
MPN or Model
TX1024D4D37-6A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.375 inches -
Fastener Length
Between 0.739 inches and 0.759 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.358 inches and 0.365 inches -
Spline Minor Diameter
0.1570 inches -
Spline Major Diameter
0.1600 inches -
Grip Diameter
0.250 inches -
Internal Drive Style
Torx -
End Application
Used on fighter aircraft (f18-e/f) -
Thread Diameter
0.250 inches -
Grip Length
0.187 inches -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Criticality Code Justification
Agav -
Part Name Assigned By Controlling Agency
Bolt 100 degee reduced head, gear drive recess-special thread length, ph13-8mo (125 ksi shear) -
Material
Stainless steel -
Surface Treatment
Aluminum -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-246-7449 MPN AIC1024-3-3Close Tolerance Screw
- 5305-00-781-5670 MPN AIC813-3-R27Machine Screw
- 5305-00-805-4253 MPN 51B221-32HClose Tolerance Screw
- 5305-00-902-2143 MPN AIC813-08-R46Machine Screw
- 5305-01-052-9112 MPN AIC984-3-7Close Tolerance Screw
- 5305-01-215-6737 MPN BACB30LK3-15Close Tolerance Screw
- 5305-01-381-2172 MPN AIC1701-3-13Close Tolerance Screw
- 5305-01-381-2350 MPN AIC818-6-525CSocket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-468-9360 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
TX1024D4D37-6A | Sps Technologies, Llc |
TX1024D4D37-6A | Arconic Global Fasteners & Rings, |
HP1262D4D37-6 | Heartland Precision Fasteners, Inc. |
TX1024D4D37-6A | Sps Technologies, Llc |
TX1024D4D37-6A | Sps Technologies, Llc |
TX1024D4D37-6A | Hi-shear Corporation |
TX1024D4D37-6A | Sps Technologies, Llc |
TX1024D4D37-6A | Lisi Aerospace Canada Corp |
11853D4D37-6A | Reid Products Inc. |
3M1262D4D37-6A | Boeing Company, The |
TX1024D4D37-6A | Sps Technologies Inc |
TX1024D4D37-6A | Alcoa Fastening Systems |