NSN 5305-01-468-9560
High Torque Screw
Between 0.735 inches and 0.765 inches fastener length, flat countersunk head style, between 0.477 inches and 0.507 inches head diameter, spline major diameter: 0.221 inches .
Manufacturer part number TX1026D4-6A for national stock number 5305014689560.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-468-9560.
-
MPN or Model
TX1026D4-6A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.354 inches and 0.425 inches -
Fastener Length
Between 0.735 inches and 0.765 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.477 inches and 0.507 inches -
Spline Major Diameter
0.221 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Single Shear Strength
125000 pounds per square inch -
Internal Drive Style
Torx -
Thread Diameter
0.250 inches -
Grip Length
Between 0.315 inches and 0.335 inches -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp xm-13 -
Material Specification
23-112, type e, cage 76301 mfr ref single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-944-9027 MPN 133A1124P6Machine Screw
- 5305-01-020-9617 MPN HT4025L3-11Close Tolerance Screw
- 5305-01-049-4054 MPN BACB30LH3U22Close Tolerance Screw
- 5305-01-097-8220 MPN HT4067-4-6AClose Tolerance Screw
- 5305-01-218-5774 MPN AIC4043-06-12Machine Screw
- 5305-01-328-3797 MPN AIC1652-4-6Close Tolerance Screw
- 5305-01-338-4567 MPN BACS12GU3K35Machine Screw
- 5305-01-476-9165 MPN TX1027V4-4AClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-468-9560 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
TX1026D4-6A | Sps Technologies, Llc |
TX1026D4-6A | Arconic Global Fasteners & Rings, |
HP1169D4-6 | Heartland Precision Fasteners, Inc. |
TX1026D4-6A | Sps Technologies, Llc |
TX1026D4-6A | Sps Technologies, Llc |
TX1026D4-6A | Hi-shear Corporation |
TX1026D4-6A | Sps Technologies, Llc |
TX1026D4-6A | Alcoa Global Fasteners, Inc. |
TX1026D4-6A | Lisi Aerospace Canada Corp |
3M1169D4-6A | Boeing Company, The |
11824D4-6A | Reid Products Inc. |
TX1026D4-6A | Alcoa Fastening Systems |