NSN 5305-01-470-6044
High Torque Screw
Between 0.785 inches and 0.815 inches fastener length, flat countersunk head style, between 0.258 inches and 0.305 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number AIC618-3-7 for national stock number 5305014706044.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-470-6044.
-
MPN or Model
AIC618-3-7
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.363 inches -
Fastener Length
Between 0.785 inches and 0.815 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.258 inches and 0.305 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
End Application
Aircraft, f-16 -
Thread Diameter
0.190 inches -
Grip Length
0.437 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Part Name Assigned By Controlling Agency
Bolt, 100" reduced head, offset cruciform, 132 ksi min shear -
Material
Steel comp h11 -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-040-9687 MPN NAS1102-08-8BMachine Screw
- 5305-00-243-8319 MPN NAS1101E4-6Machine Screw
- 5305-00-802-1826 MPN 51B221-10Close Tolerance Screw
- 5305-00-802-6798 MPN 359452Machine Screw
- 5305-00-823-5809 MPN NAS1102-06-14Machine Screw
- 5305-00-929-4102 MPN AIC82-3-7Machine Screw
- 5305-01-097-8211 MPN AIC1023H6-18Close Tolerance Screw
- 5305-01-115-7194 MPN BACB30LR-18Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
![Mechanic Bill explains High Torque Screw](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5305-01-470-6044 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AIC618-3-7 | Sps Technologies, Llc |
C20645-3-7 | Lockheed Martin Corporation |
93926-3-7 | Sps Technologies, Llc |
C20645-3-7 | Sps Technologies, Llc |
Stock Check
![](/public/images/partscage_shelf3.png)
- NE: 12607
- NS: 801