NSN 5305-01-473-8509
High Torque Screw
Between 0.797 inches and 0.827 inches fastener length, flat countersunk undercut head style, between 0.265 inches and 0.293 inches head diameter, head height: 0.049 inches .
Manufacturer part number 3M1262D3-6-7A for national stock number 5305014738509.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-473-8509.
-
MPN or Model
3M1262D3-6-7A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.437 inches -
Fastener Length
Between 0.797 inches and 0.827 inches -
Head Style
Flat countersunk undercut -
Head Diameter
Between 0.265 inches and 0.293 inches -
Head Height
0.049 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Single Shear Strength
125000 pounds per square inch -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.365 inches and 0.385 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp xm-13 -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-007-6214 MPN A1C617-22Externally Relieved Body Screw
- 5305-00-455-0382 MPN AIC4533-6-1Shoulder Screw
- 5305-00-456-2477 MPN NAS1101C04H16Machine Screw
- 5305-00-943-8137 MPN AIC813-06R21Machine Screw
- 5305-01-044-4418 MPN BACB30LH3U2Close Tolerance Screw
- 5305-01-101-2012 MPN AIC812-06-16Machine Screw
- 5305-01-137-5828 MPN SM-C-800983-48Socket Head Cap Screw
- 5305-01-217-2923 MPN BACB30LU4-26XShoulder Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-473-8509 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
3M1262D3-6-7A | Boeing Company, The |
11853D3-6-7A | Reid Products Inc. |
TX1024D3-6-7A | Sps Technologies, Llc |
HP1262D3-6-7 | Heartland Precision Fasteners, Inc. |
TX1024D3-6-7A | Sps Technologies, Llc |
TX1024D3-6-7A | Sps Technologies Inc |