NSN 5305-01-477-5659
High Torque Screw
125 ksi shear strength.
Manufacturer part number TX1026V5-14A for national stock number 5305014775659.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-477-5659.
-
MPN or Model
TX1026V5-14A
-
Schedule B
8108.90.8000 (Other wrought titanium, nesoi) -
NMF (National Motor Freight)
095190 - Hardware, NOI -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.464 inches and 0.474 inches -
Fastener Length
Between 1.329 inches and 1.359 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.623 inches and 0.633 inches -
Spline Major Diameter
Between 0.154 inches and 0.156 inches -
Grip Diameter
0.311 inches -
Point Diameter
0.469 inches -
Point Style
Flat -
Internal Drive Style
Torx -
Thread Diameter
0.312 inches -
Grip Length
Between 0.865 inches and 0.885 inches -
Thready Qty Per Inch (tpi)
24 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Part Name Assigned By Controlling Agency
Bolt, 100 degree tension head, gear drive recess -
Material
Titanium -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-942-8696 MPN 532023Machine Screw
- 5305-01-131-2206 MPN HT4024L7-19Close Tolerance Screw
- 5305-01-158-5370 MPN AI940-3-6Machine Screw
- 5305-01-240-1278 MPN C7984-3-11Close Tolerance Screw
- 5305-01-381-1408 MPN 1701-4-12Close Tolerance Screw
- 5305-01-381-2343 MPN AIC818-4-320CSocket Head Cap Screw
- 5305-01-381-2351 MPN AIC818-08-103CSocket Head Cap Screw
- 5305-01-398-6343 MPN AIC1700-4-3Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-477-5659 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
TX1026V5-14A | Sps Technologies, Llc |
TX1026V5-14A | Arconic Global Fasteners & Rings, |
3M1169V5-14A | Boeing Company, The |
11827V5-14A | Reid Products Inc. |
GS1006V5-14A | B & B Specialties Inc. |