NSN 5305-01-478-5479
High Torque Screw
Between 1.2985 inches and 1.3285 inches fastener length, flat countersunk head style, between 0.429 inches and 0.479 inches head diameter, grip diameter: between 0.311 inches and 0.312 inches .
Manufacturer part number AIC618-5-13 for national stock number 5305014785479.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-478-5479.
-
MPN or Model
AIC618-5-13
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.501 inches -
Fastener Length
Between 1.2985 inches and 1.3285 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.429 inches and 0.479 inches -
Grip Diameter
Between 0.311 inches and 0.312 inches -
Point Style
Flat -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.3125 inches -
Grip Length
0.8125 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
6300 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf
More from these suppliers
- 1560-01-268-2047 MPN 12S128-7Aircraft Structural Component Support
- 5305-00-505-3087 MPN LS15264V06-12Machine Screw
- 5305-00-809-1747 MPN 51B334-10Machine Screw
- 5305-00-840-5962 MPN 965336-1Externally Relieved Body Screw
- 5305-00-840-5962 MPN A1C617-1Externally Relieved Body Screw
- 5305-01-160-7561 MPN HT4027-5-18Close Tolerance Screw
- 5305-01-425-6240 MPN AIC4463-08-5Machine Screw
- 5305-01-435-6482 MPN BACB30LU9-24Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-478-5479 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AIC618-5-13 | Sps Technologies, Llc |
93926-5-13 | Sps Technologies, Llc |
93926-5-13 | Sps Technologies, Llc |
C20645-5-13 | Lockheed Martin Corporation |
GS1009-5-13 | B & B Specialties Inc. |