NSN 5305-01-481-9414
High Torque Screw
1.594 inches fastener length, flat countersunk head style, between 0.438 inches and 0.445 inches head diameter, spline major diameter: between 0.154 inches and 0.156 inches .
Manufacturer part number 3M1170D5-18A for national stock number 5305014819414.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-481-9414.
-
MPN or Model
3M1170D5-18A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.469 inches -
Fastener Length
1.594 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.438 inches and 0.445 inches -
Spline Major Diameter
Between 0.154 inches and 0.156 inches -
Grip Diameter
0.312 inches -
Point Diameter
0.469 inches -
Point Style
Flat -
Internal Drive Style
Torx -
End Application
F/a-18e, f/a-18f -
Thread Diameter
0.313 inches -
Grip Length
1.125 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
5820 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Criticality Code Justification
Agav -
Part Name Assigned By Controlling Agency
Bolt, 100 degree reduced head, gear drive recess - ph13-8mo (125 ksi shear), inconel 718 (125 ksi shear), 6al-4v titanium (95 ksi shear). -
Material
Steel comp xm-13 -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-456-2477 MPN NAS1101C04H16Machine Screw
- 5305-00-826-9971 MPN SK2015-703Machine Screw
- 5305-00-915-4968 MPN A1C1023H5-12Machine Screw
- 5305-00-929-1757 MPN NAS1101-3H14Machine Screw
- 5305-01-053-3359 MPN AIC984-5-8PClose Tolerance Screw
- 5305-01-056-0170 MPN BACB30LU3D9Close Tolerance Screw
- 5305-01-056-4415 MPN AIC984-3-2Close Tolerance Screw
- 5305-01-243-9348 MPN SM-C-800983-47Socket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-481-9414 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
3M1170D5-18A | Boeing Company, The |
TX1027D5-18A | Hi-shear Corporation |
TX1027D5-18A | Sps Technologies, Llc |
TX1027D5-18A | Lisi Aerospace Canada Corp |
TX1027D5-18A | Sps Technologies, Llc |
TX1027D5-18A | Arconic Global Fasteners & Rings, |
TX1027D5-18A | Sps Technologies, Llc |
HP1170D5-18 | Heartland Precision Fasteners, Inc. |
TX1027D5-18A | Sps Technologies, Llc |
TX1027D5-18A | Alcoa Fastening Systems |
11825D5-18A | Reid Products Inc. |
TX1027D5-18A | Sps Technologies Inc |