NSN 5305-01-491-0529
High Torque Screw
T.O.21m-agm65a-2,fig.10-7.
Manufacturer part number AIC1176-4-17 for national stock number 5305014910529.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-491-0529.
-
MPN or Model
AIC1176-4-17
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.425 inches -
Fastener Length
1.487 inches -
Head Style
Flat countersunk -
Head Diameter
0.497 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
1.062 inches -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
100.0 degrees -
Material
Steel -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-157-5571 MPN AIC1164-17Screw
- 5305-00-236-0023 MPN AIC813-5-R8Machine Screw
- 5305-00-310-6039 MPN AIC813-04R10Machine Screw
- 5305-00-310-6072 MPN AIC813-06R12Machine Screw
- 5305-00-310-6183 MPN AIC812-08-11Machine Screw
- 5305-00-680-5889 MPN BACB30LU-4D-35Machine Screw
- 5305-01-004-9520 MPN AIC817-08-107CSocket Head Cap Screw
- 5305-01-022-9611 MPN LS15264V08-7Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-491-0529 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AIC1176-4-17 | Sps Technologies, Llc |
653438-9 | Raytheon Company |